nedeľa, 10 decembra, 2023
HomeCraftClay Bead Bracelet - Concepts

Clay Bead Bracelet – Concepts


Let’s speak about clay bead bracelets—typically known as flat beads, too. In case you are trying to get into jewellery making, that is most likely one of many best and most cheap DIY jewellery you can begin with.

Plus, there are SO many various concepts for clay bead bracelets! I’m going to share tons on this publish, however you’ll be able to dream up so many extra.

Clay beads are normally made from polymer clay and are available any and each colour you’ll be able to consider. Clay bead bracelets are enjoyable to make for a lot of ages, together with older children.

I truly purchased my 13-year-old niece the identical clay bead equipment I purchased myself and we each love making jewellery from it. Additionally, have in mind any of those clay bead bracelet concepts may very well be repeated or made bigger right into a necklace in case you needed.

Associated: Try extra DIY equipment in our jewellery archive.

Clay Bead Bracelet Provides:

  • Clay beads
  • Elastic wire/Crystal string – I like to make use of colours however clear works effectively, too.
  • Acrylic letter beads and different accent beads or charms (some kits include these)
  • Crimping beads – for closures
  • Connectors – I exploit these on bracelets with an elastic wire so you’ll be able to pull it over your hand, so that you don’t want to lock a clasp, which might be troublesome one-handed.
  • Scissors – the smaller, the higher (some jewellery pliers would work for this too)
  • Jewellery pliers – for crimping beads and different jewellery making duties
  • Bead board – or a felt to cowl your work floor

There are lots of other ways you’ll be able to design your clay bead bracelet with totally different equipment or clasp and closures. However these are the essential provides that I used to make the bracelets you see pictured.

Tips on how to Make Bead Bracelets:

  • Design your bracelet. I like to put out the beads on my bead board to ensure I’m proud of my design earlier than I begin stringing the beads collectively. This manner, I can make certain I like the colours or I can change out the charms or different accent beads I’m utilizing in my design.
  • Reduce a bit of elastic wire twice as massive because the widest a part of your hand so you will have a lot to work with.
  • Loop the underside of the wire by way of a crimping bead, then one facet of the connector, then again by way of the identical crimping bead once more.
  • Use your pliers to crimp (smash down) the crimping bead, fastening the wire in place.
  • String your design onto the wire.
  • Test that the bracelet is the size you design (if not, add or take off beads).
  • Add one other crimping bead to the tip, loop the wire by way of the opposite facet of the connector, after which by way of the identical crimping bead and pull tight.
  • Use your pliers once more to crimp down on the bead, fastening the wire in place.
  • When you’ve got further wire on both facet, you’ll be able to snip it off and/or tuck it into the beads beside it.

Clay Bead Bracelet Concepts:

Listed here are some concepts for various sorts of designs and colour combos you’ll be able to strive!

  • Multicolored! You’ll be able to repeat the colours or simply add them at random.
  • Use all main colours (crimson, blue, yellow)
  • Use all secondary colours (orange, inexperienced, purple)
  • Monochromatic – use all one tone or just one colour bead for a stable look.
  • All white or black
  • Break up clusters with charms or a glass bead.
  • Add your title or a pal’s title for gifting.
  • Add a appeal or a number of charms for a appeal bracelet look.
  • Fill many of the bracelet with small gold beads and use the coloured clay beads as an accent.

The place to Purchase Beads?

Under, I’ll hyperlink lots of the particular beads and charms I’ve purchased on-line. But additionally remember that you should purchase beads and jewellery making provides from many various locations like thrift shops, property gross sales, Etsy and eBay.

Additionally, when you have previous jewellery that you just not put on, you would possibly take it aside and repurpose it in your designs.

  1. My favourite primary clay bead bracelet equipment (consists of wire and instruments)
  2. Steel letters
  3. Fruit charms
  4. Mushroom beads
  5. Freshwater pearl beads

Steadily Requested Questions

What number of clay beads make a bracelet?

For an grownup with small to medium fingers, 125-150 clay beads will make a bracelet. You could want roughly or smaller or bigger sized bracelets.

What string do you utilize for clay bead bracelets?

Elastic wire (typically known as crystal string) is finest. You need to use clear or a colour. However this wire can have some stretch so you’ll be able to simply pull the bracelet on and off your hand with no need to make use of a clasp.

Are clay bead bracelets waterproof?

Polymer clay (which is normally what clay beads are made from) is waterproof. Nonetheless, most bracelets can have different supplies like string and charms and these could not maintain as much as soaking.

Can clay beads be washed?

Sure. Gently wash with cleaning soap and water in case you get meals or filth in your bracelet. The colours won’t run or fade.

DIY clay bead bracelets are such a enjoyable challenge anybody can do. I additionally love that it’s one thing you’ll be able to work on whereas watching a film. 🙂

Associated: 15 Crafts You Can Do Whereas Watching TV


Print

get the how-to
Get the How-To

easy methods to make clay bead bracelets plus a lot of concepts for designs

Cook dinner 15 minutes

Whole 15 minutes

Directions

  • Design your bracelet – I like to put out the beads on my bead board to ensure I’m proud of my design earlier than I begin stringing the beads collectively. This manner I can make certain I like the colours or I can change out the charms or different accent beads I’m utilizing in my design.

  • Reduce a bit of elastic wire twice as massive because the widest a part of your hand, so you will have a lot to work with.

  • Loop the underside of the wire by way of a crimping bead, then one facet of the connector, then again by way of the identical crimping bead once more.

  • Use your pliers to crimp (smash down) the crimping bead, fastening the wire in place.

  • String your design onto the wire.

  • Test that the bracelet is the size you design (if not, add or take off beads).

  • Add one other crimping bead to the tip, then loop the wire by way of the opposite facet of the connector, then by way of the identical crimping bead and pull tight.

  • Use your pliers once more to crimp down on the bead, fastening the wire in place.

  • When you’ve got further wire on both facet, you’ll be able to snip it off and/or tuck it into the beads beside it.

Notes

Design concepts to strive:

  • Multicolored! You’ll be able to repeat the colours or simply add them at random.
  • Use all main colours (crimson, blue, yellow)
  • Use all complimentary colours (orange, inexperienced, purple)
  • Monochromatic – use all one tone or just one colour bead for a stable look
  • All white or black
  • Break up clusters with charms or a glass bead
  • Add your title or a pal’s title for gifting
  • Add a appeal or a number of charms for a appeal bracelet look
  • Fill many of the bracelet with small gold beads and use the coloured clay beads as an accent.
RELATED ARTICLES

LEAVE A REPLY

Please enter your comment!
Please enter your name here

Most Popular

Recent Comments