streda, 29 novembra, 2023
HomeCraftDIY Stand Mixer Wood Lid

DIY Stand Mixer Wood Lid

This can be a sponsored submit written by me on behalf of Interest Foyer. All opinions are 100% mine.

You gained’t imagine how straightforward it’s to make a wood cowl to your lift-bowl stand mixer. No energy instruments required!

I’m so enthusiastic about at this time’s undertaking. Just a few years in the past, I took the wood lid off a candle and the thought hit me that the identical sort of lid might work for a mixing bowl. I instructed my husband my concept and he made me the best lid for my stand mixer bowl. I find it irresistible as a result of it retains mud out of the bowl and I can retailer the attachments within the bowl beneath the lid. Plus it’s simply plain fairly and since I hold my mixer out on the counter, I actually respect the clear, lovely aesthetic.

The issue is that he used a bunch of specialised instruments and it was very sophisticated… or a minimum of for somebody like me who says a prayer earlier than utilizing the desk noticed.

Then a number of weeks in the past I used to be shopping the aisles of Interest Foyer and noticed two wooden items that jogged my memory of the lid my husband had made and I made a decision to see if I might give you a solution to make a lid with no energy instruments or fussy gear required.

And right here we’re.

diy kitchenaid bowl cover

Have a look at that attractive, customized lid!

Wish to make one? It’s tremendous straightforward, promise!

wooden kitchenaid lid DIY

Supplies Wanted

Vital Notice: There are two primary kinds of stand mixers from the preferred model– tilt-head mixers and lift-bowl mixers. This undertaking is for lift-bowl mixers solely.

lift bowl vs tilt head kitchenaid mixers

When you have one other mannequin or model, measure your bowl earlier than purchasing (or take it with you to the shop) to see if it’s going to give you the results you want.


Step 1: Sand each wooden items till they’re clean to the contact. The thinner circle is product of plywood, so solely sand the sides to take away any little splinters. The opposite piece is strong wooden and you’ll sand extra aggressively.

Step 2: Apply the wooden stain of your alternative, brushing in the identical path because the wooden grain. I used an previous brush that I knew I might throw away. Foam brushes work nice for this too. Since stain is oil-based, it’s a ache to clean out the brushes. That’s why I counsel utilizing one thing disposable. It’s also possible to put on rubber gloves for this step to maintain your arms clear, if desired. Wipe away any extra stain with a paper towel. The longer the stain sits, the darker the colour will probably be, so it’s as much as you to determine when to wipe away the stain.

easy stained wood craft

Step 3: When the stain is dry (the directions on the can say to attend two hours), add a transparent prime coat. I actually like Polycrylic as a result of it gained’t yellow over time and is water-based for simple clear up. A prime coat is certainly wanted since this lid will probably be within the kitchen and presumably be uncovered to water. The highest coat will shield the wooden. I did three coats, ready the required period of time between every coat.

Step 4: When the highest coat is dry (the directions on the can say 3 hours for mild dealing with and 24 hours for normal use), apply an excellent layer of wooden glue to the flat aspect of the wooden plaque, then connect it to the plywood spherical, ensuring they’re precisely centered.

Step 5: Clamp the items collectively to make sure a good seal whereas the glue dries. In case you don’t have clamps, you possibly can place the wooden beneath a pile of heavy books as an alternative. Simply ensure that these items keep precisely lined up. Painter’s tape would possibly assist with this.

As soon as the glue is dry, your stand mixer lid is completed and able to be put in place.

diy mixer bowl lid

Or you may take it one step additional and add a customized vinyl decal or hand-paint a cute design on the lid or add a wooden applique element. It might be actually enjoyable to make a bunch of vacation themed decals utilizing detachable vinyl. Then you may swap them out all year long. The probabilities are limitless. Completely customizable to match your fashion!

diy kitchenaid bowl lid made of wood

I actually love how my lid turned out. The nice and cozy pop of wooden, the clear strains and the performance… it’s only a actually welcome addition to my kitchen. In case you’re in search of extra methods to refresh your private home within the New 12 months, cease by Interest Foyer for the cutest choice of Residence Decor.

stand mixer bowl cover diy lid

Video Tutorial

Like this concept? Pin it!

kitchenaid wooden bowl cover DIY



Please enter your comment!
Please enter your name here

Most Popular

Recent Comments